Sign In Sign-Up

Welcome!

Close

Would you like to make this site your homepage? It's fast and easy...

Yes, Please make this my home page!

No Thanks

  Don't show this to me again.

Close

M919 Rev. 3.4 B/F

PCChips M919 Amptron DX9500 Amptron DX9700 Eurone EM-4500U

Here you will find only little information:

• Revisions so far:
  • Rev. 1.2, Cache-Sockets, four 30-Pin and 2 72-Pin Ram-Sockets.
  • Rev. 1.4, Cache-Sockets, four 72-Pin Ram-Sockets. Picture
  • Rev. 1.5, ?
  • Rev. 3.2, Cache-Module, four 30-Pin and two 72-Pin Ram-Sockets.
  • Rev. 3.3, ?
  • Rev. 3.4, Cache-Module, four 72-Pin Ram-Sockets. Picture
Note that in the small picture above, the two FAKE-Cache-Chips are missing.
Amptron has two names for the board. The DX9500 is Rev. 1.x, Rev. 3.x is named DX9700.

• Even if the Cache-Module on this board looks like a Coast-Module, it is not!.
  A Coast-Module will not work!
• The latest Bios is at
  
  • BNS or
  • here.
  • The previous version is here.
  This bios requires (!) a flashable chip.
  An Atmel 29C010 works fine in my board.
• IDE-Drivers? Sure!
• If you have an old Bios and experience troubles with your Soundblaster PnP-Card, you'll need this tool.
• Take a look at the original pages for features and jumpers.
• I had to rplace the two transistors for the onboard power plane (the ones with the heatsinks). Mine were NEC D1691. I used compatible D826. Works perfect so far.
• All testprgs state, that the memory above 56 MB is uncached.
• I've got reports, that Adaptec 154x-ISA SCSI Controllers make troubles with this board.
• A must for the owner of such a board was the Unofficial Homepage.
  Unfortunately it's gone now.
  Here is what I have found on my backups.

If you have questions, contact me

Back

36795